Fluke 437 Three-Phase Power Quality And Energy Analyser without Clamps

Fluke 437 Three-Phase Power Quality And Energy Analyser without Clamps

·         Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available)

·         Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp

·         PowerWave data capture: 435 and 437 Series II analysers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.)

·         Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up 

·         Fully Class-A compliant: 437 Series II analysers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard

·         Mains signalling: analysers measure interference from ripple control signals at specific frequencies

·         400 Hz measurement: 437 Series II analyser captures power quality measurements for avionic and military power systems

·         Troubleshoot real-time: Analyse the trends using the cursors and zoom tools

·         Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance

·         Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places

·         Automatic Trending: Every measurement is always automatically recorded, without any set-up

·         System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard

·         Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals

·         View graphs and generate reports: With included analysis software

Whats you get with the 435 Analyser

·         BC430 Power Adapter

·         International plug adapter set

·         BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)

·         Leads TL430 Test lead and Alligator clip set

·         Colour coding WC100 colour coding clips and regional decals

·         8 GB SD card (32GB optionally)

·         Power Log on CD (includes operator manuals in PDF format)

·         USB cable A-Bmini

·         C437-II Hard Case with rollers

To Download Data Sheet Click Here