Fluke 43B Power Quality Analyzer

Click over image to enlarge

Price: $5,950.00

The selected item is out of stock, please select a different item or combination

Fluke 43B power analyser
* NiMH Battery provides extended operating time of 6.5 hours
* Combines the most useful capabilities of a power quality analyzer, multimeter and scope
* Calculates 3-phase power on balanced loads, from a single-phase measurement
* Trends voltage, current, frequency, power harmonics and captures voltage sags, transients and inrush current
* Monitoring functions help track intermittent problems and power system performance
* Records two selectable parameters for up to 16 days
* 20 measurement memories to save/recall screens and data with cursor readings
* FlukeView® software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
* Measures resistance, diode voltage drop, continuity, and capacitance
* Users/applications manual and power quality video to help answer tough questions
* Complete package with voltage probes and 400 A current clamp, FlukeView Software and optically isolated interface cable
* 3 year warranty on the Fluke 43B, 1 year on accessories

Fluke 43B Power Quality Analyzer - Get control of power problems

The Fluke 43 Power Quality Analyzer performs the measurements you need to maintain power systems,
troubleshoot power problems and diagnose equipment failures. All in a rugged handheld package.





What's Included?

C120 Hard Case

TP1 Flat-tipped Slim-Reach Test Probes

TP4 4 mm Round Slim-Reach Test Probes

i400s AC Current Clamp

OC4USB Optically Isolated USB Interface Adapter

BP120MH Rechargeable NiMH Battery Pack (installed)

PM 8907 Line Voltage Adapter/Battery Charger

SW43W FlukeView™ Power Quality Analyzer Software and Users Manual on CD-ROM

Shielded Banana-to-BNC Adapter

Users Manual / Application Guide

Specifications
Input Characteristics	Input impedance  1 MΩ, 20 pF Voltage rating  600V rms, CAT III
V/A/Hz Display	True-rms voltage (ac + dc)   Ranges:  5.000 V, 50.00 V, 500.0 V, 1250 V* Accuracy:  ±(1% + 10 counts)   True-rms current (ac + dc)   Ranges:  50.00 A, 500.0 A, 5.000 kA, 50.00 kA, 1250 kA Accuracy:  ±(1% + 10 counts)   Frequency   Ranges:  10.0 to 15.0 kHz Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2   CF Crest factor   Ranges:  1.0 - 10.0 Accuracy:  ±(5% + 1 count)
Power Display	Watts, VA, VAR    1-phase and 3-phase,3 conductor balanced loads Ranges:  250 W - 1.56 GW Accuracy:  ±(4% + 4 counts) Fundamental Power Accuracy:  ± (2 % + 6 counts) Total Power   PF Power Factor   Range:  0 - 1.0 Accuracy:  ±0.04 DPF Displacement Power Factor, Cos .F   Range:  0.25 - 0.9 Accuracy:  ±0.04 Range:  0.90 - 1.0 Accuracy:  ±0.03   H2 Frequency Fundamental   Ranges:  40.0 to 70.0 Hz Accuracy:  ± ([% of reading] + [counts]): 0.5% + 2
Harmonics Display	Voltage, Current, Frequency   Ranges:  Fundamental to 51st harmonic Accuracy:   Fundamental:  VA ±(3% + 2 counts) W ±(5% + 2 counts) 2 to 31st harmonic:  VA ±(5% +3 counts) W ±(10% +10 counts) 32 to 51st harmonic:  VA ±(15% +5 counts) W ±(30% +5 counts)   Frequency Fundamental   Ranges:  40 Hz to 70 Hz Accuracy:  ±0.25 Hz   Phase   Range:  V, A (between Fundamental & Harmonics) Accuracy:  ±3º to ±15º Range:  W (between Voltage Fundamental & Current Harmonics) Accuracy:  ±5º to ±15º   K-factor (Current and Power)   Range:  1.0 to 30.0 Accuracy:  ±10%   THD Total Harmonic Distortion   Range:  0.00 - 99.99 Accuracy:  ±(3% + 8 counts)
Sags and Swells	Recording times:  4 min to 16 days (selectable) Vrms Actual, Vrms max, min(AC + DC)   Ranges:  5.000V, 50.00V, 500.0V, 1250V* Accuracy:  Readings ±(2% +10 counts); Cursor readings ± (2% + 12 counts)   Arms Actual, Arms max, min (AC + DC)   Ranges:  50.00A, 500.0A, 5.000 kA, 50.00 kA Accuracy:  ±(2% +10 counts)
Transient Capture	Minimum pulse width:  40 ns Useful bandwidth input 1:  DC to 1 MHz Number of transients:  40 Voltage threshold settings:  20%, 50%, 100%, 200% above or below reference Reference signal:  After START, the Vrms and frequency of the signal are measured. From these data a pure sinewave is calculated as reference for threshold setting. Vpeak min, Vpeak max at cursor:  10 V, 25 V, 50 V, 125 V, 250 V, 500 V, 1250 V Accuracy: ±5% of full scale
R, C, Diode, Continuity	Resistance ranges:  500.0 Ω, 5.000 kΩ, 50.00 kΩ, 500.0 kΩ, 5.000 MΩ, 30.00 MΩ Resistance accuracy:  ±(0.6% + 5 counts) Capacitance ranges:  50.00 nF, 500.0 nF, 5.000 µF, 50.00 µF, 500.0 µF Capacitance accuracy:  ±(2% + 10 counts) Diode Ranges:  0 to 3.000 V Diode voltage:   Accuracy:  ±(2% + 5 counts) Continuity:  Beeper on at < 30 Ω ± 5 Ω Max current:  0.5 mA Temperature:  °C or °F
Inrush Current	Inrush times:  1 s, 5 s, 10 s, 50 s, 100 s, 5 min Current ranges:  1 A, 5 A, 10 A, 50 A, 100 A, 500 A, 1000 A Cursor readings:  A peak max at cursor 1 and cursor 2 Accuracy:  ±5% of full scale Time between cursors:  4 to 235 pixels (1 pixel = inrush time/250) Accuracy: ±(0.2% + 2 pixels)
Temperature (with accessory)	Range:  -100 °C - 400 °C Accuracy:  ±(0.5% + 5 counts)
Scope Display	Measurements:  dc, ac, ac+dc, peak, peak-peak, frequency, duty cycle, phase, pulse width, crest factor Time ranges:  20 ns/div to 60 s/div Max sampling rate:  25 MS/s Bandwidth   Voltage channel [1]:  20 MHz at inputs, 1 MHz with TL24 Leads Current channel [2]:  DC to 15 kHz at inputs, 10 kHz with i400s Current Clamp Coupling:  AC, DC (10 Hz - 3 dB) Vertical sensitivity:  5 mV/div to 500V/div Vertical resolution:  8 bit (256 levels) Record length:  512 samples per channel Base ranges:  60 S/div to 20 nS/div ± (0.4% + 1 pixel) Timebase modes:  Normal, roll, single Pre-trigger:  Up to 10 divisions Trigger Source:  Input 1 or Input 2 or automatic selection Trigger Mode:  Automatic Connect-and-View™, Free Run, and Single Shot   Connect-and-View™:  Advanced automatic triggering that recognizes signal patterns  Automatically adjusts triggering, timebase and amplitude and displays stable pictures
Memories	20 (screens, settings, data)
Recording	Recording times:  4 min to 16 days (selectable) Parameters:  Choose one or two parameters from one of the groups below:  Volts/Ampères/Hertz Power:  Watts, VA, VAR, PF, DPF, Frequency  Harmonics, THD, Volts (Fund. & Harmonic), Ampères (F&H) Watts(F&H)  Frequency (H), %(H) of total, Phase(H), KF  Temperature Resistance:  Resistance, Diode, Continuity, Capacitance Scope:  DC Voltage, DC Current, AC Voltage, AC Current, Frequency,  Pulse Width + or -, Phase, Duty cycle + or -, Peak max, Peak min, Peak min-max, Crest Factor
Note	*Rated EN 61010-1 600 V CAT III CSA

Click here to download the Fluke 43B Data Sheet