Fluke 789 Process Multimeter with HART resistor

Click over image to enlarge

Price: $1,385.00 + GST + GST

Price Alert

Price Alert

First Name:

Last Name:

e-mail Address:

Company:

Phone Number:

Time Frame Till Purchase undetermined 0 - 1 month 1 - 6 months
6 - 12 months +12 months

Product ID:Fluke-789

Product Name:Fluke 789 Process Multimeter with HART resistor

Manufacturer:Fluke

Manufacturer: Fluke

E-mail to a friend | Add To Wish List

The selected item is out of stock, please select a different item or combination

- DMM and Loop Calibrator in one tool
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Precision 1000 V, 440 mA True-rms digital multimeter
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- Simultaneous mA and % of scale readout
- 20 mA dc current source / loop calibrator / simulator
- Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
- 24 V Loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- 1200 ohm drive capability on mA source
- Enhanced backlight with two brightness settings

- 0-100% mA Span Check buttons to toggle between 4 and 20 mA
- Infrared I/O serial port compatible with FlukeView Forms Software V 2.1
- Externally accessible fuses for easy replacement

Fluke 789 - Safety rated multimeter with mA source.

Now process technicians can do a lot more while carrying a lot less.  The ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The Fluke 789 ProcessMeter was the first tool to combine a loop calibrator with a DMM to give process technicians double the power in one tool.

The Fluke 789 has a display that’s not only twice as large, but also twice as bright with two levels of backlighting.The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you.

Also see the Fluke 787 ProcessMeter for a lower price option

• Alligator Clips
• Protective Yellow Holster with test lead storage
• 4 x  AA alkaline battery
• Fluke TL71 Safety-Designed Test lead Set
• Product overview and Users Manual (CD-ROM) in 14 languages

 

 

 

DC current source/loop calibrator

• 20 mA current source/simulator
• Simultaneous mA and % of scale readout
• Manual step (25%, coarse, fine) plus auto step and auto ramp

Safety Conformance

The Fluke 789 meets 1000 volt EN61010-1 CAT III standards.

Download the Fluke 789 Data Sheet

 

 

 

Online fluke 789 Shopping Information for Australia

Buy the fluke 789 online with confidence. Test-Equipment-Shop.com.au & Test Equipment Solutions is an authorised Australian distributor of Fluke Products. We delivery the fluke 789 to Sydney, Canberra, Brisbane, Perth, Melbourne, Adelaide, Hobart, Darwin and Australia-wide. Test-Equipment-Shop.com.au has all the information you need to buy fluke 789 in Australia at the lowest possible price. 

fluke 789 Prices Disclaimer

fluke 789 prices on Test-Equipment-Shop.com.au are provided as an invitation to offer. Test-Equipment-Shop.com.au takes all care no responsibility for the accuracy of fluke 789 information or fluke 789 specifications as these are subject to change and outside our control. All prices and product specifications are obtained from Fluke Australia and third parties. Test-Equipment-Shop.com.au takes every possible precaution to deliver only accurate information, but can not be held responsible for information presented..